Over 250 types of lubricants and coolants

Politern ZMS

For hardening steel, cast iron, aluminum alloys

Politren AM-5

Biocide. Universal biocide, has antibacterial activity, exhibits some fungicidal activity. Compatible with cutting fluids of the Politren E-25, E-251, E-50, E-510, E-90 series.

Politren AM-7

Biocide. An effective biocide for controlling biodeterioration during operation. Compatible with synthetic cutting fluids of the Politren E-25, E-251, E-50, E-510 series.

Politren AM-8

Biocide. Biocide, has fungicidal activity, exhibits some antimicrobial activity. Compatible with cutting fluids of the Politren E-25, E-251, E-50, E-510, E-90 series.

Politren AM-9

Biocide. Added to cutting fluids of the Politren E-25, E-251, E-50, E-510, E-90 series.

Politren AV-5

Defoamer. Economical defoamer for cutting fluids of the Politren E-25, E-251, E-50, E-510, E-90 series.

Politren AV-5/2

Defoamer. Highly economical defoamer for coolants of the Politren E-25, E-251, E-50, E-510, E-90 series.

Politren AV-6

Defoamer. Highly effective defoamer in cutting fluids of the Politren E-25, E-251, E-50, E-510, E-90 series.

Politren B-3

Water-graphite cutting fluid. Hot stamping of steels and alloys, hot stamping of aluminum and titanium alloys.

Politren CV joint

Consistent lubricant. Lubrication of constant velocity joints of automobiles, and also used in various heavily loaded friction units of automobiles, machines and mechanisms.

Politren D

Reactive technological lubricant (replaces the classic phosphating technology with the stages - activation, phosphating, saponification). Deep deformation of carbon steel - drawing, broaching. Drawing of steel pipes.

Politren D-1

Reactive technological lubricant (replaces the classic phosphating technology with the stages - activation, phosphating, saponification). Deep deformation of carbon steel - upsetting, stamping.

Politren D-2

Reactive oil (with phosphating function). Deep deformation of carbon steel - drawing, broaching. Drawing of steel pipes with high requirements for surface quality.

Politren D-3

Reactive oil (with phosphating function). Deep deformation of carbon steel - drawing, broaching. Drawing of steel pipes with high requirements for surface quality. Low viscosity.

Politren DF-1

Graphite-containing lubricant-deoxidizer. Hot rolling of pipes on short-mandrel mills TPA in the production of hot-rolled seamless pipes.

Politren DF-14

Lubricant-deoxidizer. Hot rolling of pipes on short-mandrel mills TPA in the production of hot-rolled seamless pipes.

Politren DF-2

Lubricant-deoxidizer. Hot rolling of pipes on short-mandrel mills TPA in the production of hot-rolled seamless pipes.

Politren DF-3

Graphite-containing lubricant-deoxidizer. Hot rolling of pipes on short-mandrel mills TPA in the production of hot-rolled seamless pipes.

Politren DF-4

Lubricant-deoxidizer. Hot rolling of pipes on short-mandrel mills TPA in the production of hot-rolled seamless pipes.

Politren DF-5

Deoxidizer. Transformation of scale from the inner surface of a heated billet during hot rolling of pipes on PQF and FQM type mills.

Politren DF-51

Deoxidizer. Transformation of scale from the inner surface of a heated billet during hot rolling of pipes on PQF and FQM type mills.

Politren DF-9

Безборатный дезоксидант. Горячая прокатка труб на короткооправочных станах ТПА при производстве горячекатанных бесшовных труб.

Politren E-21

Water-emulsion graphite cutting fluid. Die casting of aluminum alloys. Used as a release coating for application to the mold.

Politren E-22

Water-emulsion graphite cutting fluid. Die casting of aluminum alloys. Used as a release coating for application to the mold.

Politren E-221

Water-emulsion cutting fluid. Hot stamping of copper alloys using the Autofordge method.

Politren E-25

Synthetic cutting fluid. Cold metalworking. The cutting fluid has very high lubricating properties. It is used for processing carbon and stainless steels, titanium, copper and aluminum alloys in the processes of milling, turning, drilling, cutting on circular and band saws, grinding, thread cutting, tempering and rolling.

Politren E-251

Synthetic cutting fluid. Cold metalworking. Universal synthetic cutting fluid, has very good lubricating properties under high loads. It is used for processing carbon and stainless steels, titanium, copper and aluminum alloys in the processes of milling, turning, drilling, cutting on circular and band saws, grinding, thread cutting, tempering and rolling.

Politren E-291

Graphite-free coolant. Hot and semi-hot stamping of steels and alloys.

Politren E-292

Graphite-free coolant. Hot and semi-hot stamping of steels and alloys.

Politren E-41

Water-graphite coolant. Hot upsetting of pipe ends, for heavy stamping operations of steels and alloys.

Politren E-412

Water-graphite coolant. Hot upsetting of pipe ends, for heavy stamping operations of steels and alloys, excellent washability ensures cleanliness of the workplace.

Politren E-42 V

Mineral coolant. All cold metalworking processes, including rolling. Universal coolant.

Politren E-50

Synthetic cutting fluid. Cold metalworking. Universal cutting fluid. Suitable for heavy-duty operations, including deep drilling, turning, other heavy-duty drawing and pressing processes of thick-walled steels.

Politren E-500

Synthetic cutting fluid. Production of aluminum cans. Works at the stage of drawing the can from the cup on machines for the production of aluminum can bodies.

Politren E-51

Synthetic expander oil. Calibration of large diameter pipes on expanders such as SMS MEER, Mannesmann-Demag and others, as well as a lubricant used in heavy-duty cold metal forming and cold rolling operations. Used in ready-to-use form, easily washed off, completely water-soluble.

Politren E-510

Synthetic cutting fluid. Cold metalworking. Universal synthetic cutting fluid. Suitable for heavy-duty operations, including drawing and pressing thick-walled steels, deep drilling. For processing heat-resistant, hard-to-deform (cobalt, nickel-chrome, etc.) alloys and stainless steels.

Politren E-61

Water-emulsion coolant. Die casting of aluminum alloys. Used as a release coating for application to the mold.

Politren E-611

Water-emulsion coolant. Die casting of aluminum alloys, including for the manufacture of highly complex parts. It is used as a separating coating for application to the mold.

Politren E-614

Water-emulsion coolant. Die casting of aluminum alloys, including for the manufacture of highly complex and large parts. It is used as a separating coating for application to the mold.

Politren E-615/0

Die casting of aluminum alloys, including for the manufacture of highly complex and large parts. Used as a release coating for application to molds.

Politren E-615/1

Die casting of aluminum alloys, including for the manufacture of highly complex and large parts. Used as a release coating for application to molds.

Politren E-615/2

Die casting of aluminum alloys, including for the manufacture of highly complex and large parts. Used as a release coating for application to molds.

Politren E-70

Processing of carbon and stainless steels, titanium, copper, and aluminum alloys in milling, turning, drilling, cutting on disc and band saws, grinding, dressing, and rolling processes

Politren E-90

Semi-synthetic cutting fluid. Processing of carbon and stainless steels, titanium, copper and aluminum alloys in the processes of milling, turning, drilling, cutting on circular and band saws, grinding, tempering and rolling.

Politren E-99

Processing of carbon and stainless steels, titanium, copper, and aluminum alloys in milling, turning, drilling, cutting on disc and band saws, grinding, dressing, and rolling processes

Politren EK

Protective anti-corrosion coating

Politren ET

Water-emulsion graphite-free cutting fluid. Die casting of aluminum alloys with crystallization.

Politren ET-1

Water-emulsion graphite-free cutting fluid. Die casting of aluminum alloys with crystallization.

Politren ET-154

Water-emulsion graphite-free cutting fluid. Die casting of aluminum alloys with crystallization, improved separation properties.

Politren ET-17

Water-emulsion graphite-free cutting fluid. Die casting of aluminum alloys with crystallization, improved separation properties.

Politren ET-618

Water-based technological paste. Chill casting. Universal release agent for metal molds (chill molds) when casting non-ferrous metals and their alloys, as well as when casting cast iron.

Politren ET-9

Water-based technological paste. Chill casting. Universal release agent for metal molds (chill molds) when casting non-ferrous metals and their alloys.

Politren EV-13

Synthetic cutting fluid. Wet drawing of steel wire, including copper-plated, brass-plated and galvanized wire.

Politren EV-131

Synthetic cutting fluid. Wet drawing of steel wire, including copper-plated, brass-plated and galvanized wire, for high drawing speeds.

Politren EV-134

Synthetic cutting fluid. Wet drawing of steel wire, including copper-plated, brass-plated and galvanized wire.

Politren EV-2

Synthetic cutting fluid. Wet drawing of steel wire, including copper-plated, brass-plated and galvanized wire.

Politren EV-3

Synthetic cutting fluid. Wet drawing of steel wire, including copper-plated, brass-plated and galvanized wire.

Politren Grafitol

Consistent lubricant. Lubrication of friction and sliding units of industrial equipment.

Politren HP-1

Technological lubricant. Cold deformation of steels (upsetting, drawing, cold stamping, drawing, extrusion, profile reduction, shaping of pipe ends), including use for high-alloy, heat-resistant and stainless steels, titanium.

Politren HP-103

Cold deformation of steels (upsetting, drawing, cold stamping, broaching, extrusion, profile reduction, pipe end forming), including high-alloy, heat-resistant, and stainless steels, titanium. Used in the drawing of pipes and tubes made of stainless steels for internal surfaces.

Politren HP-15

Technological lubricant. Cold deformation of steels (upsetting, drawing, cold stamping, drawing, extrusion, profile reduction, shaping of pipe ends), including use for high-alloy, heat-resistant and stainless steels, titanium. Used in drawing stainless steel pipes for the outer surface.

Politren HP-16

Technological lubricant. Cold deformation of steels (upsetting, drawing, cold stamping, drawing, extrusion, profile reduction, shaping of pipe ends), including use for high-alloy, heat-resistant and stainless steels, titanium. Used in the process of calibration of steel and high-carbon rolled products.

Politren HP-17

Technological lubricant. Cold deformation of steels (upsetting, drawing, cold stamping, drawing, extrusion, profile reduction, shaping of pipe ends), including use for high-alloy, heat-resistant and stainless steels, titanium. Used in drawing pipes and tubes made of stainless steels for the outer surface.

Politren HP-2

Technological lubrication. Cold deformation of steels (upsetting, drawing, cold stamping, drawing, extrusion, profile reduction, shaping of pipe ends), including use for high-alloy, heat-resistant and stainless steels, titanium. Drawing of stainless steel pipes through a mandrel ring.

Politren KM-100

Rope production. Anti-corrosion protection of rope

Politren KM-130

Rope production. Anti-corrosion protection of rope

Politren KS-211

Dry technological lubricant for drawing. Sodium base. Dry drawing of high-carbon steel wire. For high drawing speeds. High fat content.

Politren KS-212

Dry technological lubricant for drawing. Sodium base. Dry drawing of high-carbon steel wire. For high drawing speeds. High fat content.

Politren KS-217

Dry technological lubricant for drawing. Sodium base. Dry drawing of all types of steel wire, including high-carbon, for high and medium drawing speeds. High fat content, reduced consumption.

Politren KS-3

Dry technological lubricant for drawing. Calcium-sodium base. Dry drawing of all types of steel wire. For high drawing speeds.

Politren KS-8

Dry technological lubricant for drawing. Calcium base. Dry drawing of all types of steel wire. Used for the production of high-carbon wire.

Politren KS-85

Dry technological lubricant for drawing. Calcium base. Dry drawing of all types of steel wire. Used for rough and medium drawing processes. Low fat content.

Politren KS-86

Dry technological lubricant for drawing. Calcium base. Dry drawing of all types of steel wire, including large diameters. Used for the production of high-carbon wire, medium and low speeds. Medium fat content.

Politren LS

Graphite-free water-soluble cutting fluid. Hot stamping of steels and alloys, including aluminum and copper.

Politren LS-1

Graphite-free water-soluble cutting fluid. Hot stamping of steels and alloys, including aluminum and copper.

Politren LSF-5

Graphite-free coolant. Hot stamping of copper, brass, copper-nickel alloys.

Politren M-10

Oil-graphite technological lubricant. Hot and semi-hot stamping of steels and alloys, hot upsetting of steel pipe ends.

Politren M-100

Grinding of steels and alloys, including stainless steels

Politren M-1000

Oil coolant. Heavy metalworking processes. For cold stamping, drawing, deep drilling, turning, gear milling, gear cutting, gear shaping and other steel and alloy processing operations.

Politren M-1010

Oil coolant. Heavy metalworking processes. For cold stamping, drawing, deep drilling, turning, gear milling, gear cutting, gear shaping and other steel and alloy processing operations.

Politren M-1011

High-viscosity oil coolant. Heavy metalworking processes. For cold stamping, drawing, deep drilling, turning, gear milling, gear cutting, gear shaping and other steel and alloy processing operations.

Politren M-1015

Low-viscosity oil coolant. Very heavy metalworking processes. For cold stamping, drawing, deep drilling, turning, gear cutting, gear shaping and other steel and alloy processing operations.

Politren M-1016

Oil coolant. Cold metalworking. For any operations with materials that are difficult or extremely difficult to process. For deep drilling, broaching, milling teeth, cutting, threading.

Politren M-1020

Medium viscosity oil coolant. Heavy metalworking processes. For cold stamping, drawing, deep drilling, turning, gear cutting, gear hobbing and other steel and alloy processing operations.

Politren M-12

Oil-graphite technological lubricant. Die casting of aluminum alloys. Used for application to the pressing pair.

Politren M-120

Grinding of steels and alloys, including stainless steels

Politren M-150

Low-viscosity oil coolant. Grinding of steels and alloys, including stainless steels.

Politren M-150/14

Medium viscosity oil coolant. Grinding of steels and alloys, including stainless steels.

Politren M-154

Oil coolant. Knurling of axles, for cold rolling operations of all grades of steel and alloys, drawing, stamping and grinding.

Politren M-156

Synthetic oil coolant. Grinding of steels and alloys, including stainless steels.

Politren M-157

Fast-evaporating oil coolant. Cold stamping and forming of all grades of steel and non-ferrous metals, including for lubrication of spindles.

Politren M-159

Oil coolant. Thread rolling, including for hardware production.

Politren M-160

Oil coolant. Honing. Does not form oil mist during operation.

Politren M-164

Medium viscosity oil coolant. For sliding guides.

Politren M-167

Low-viscosity oil coolant. Cold stamping, forming, grinding of all grades of steel and non-ferrous metals.

Politren M-168

Oil coolant. Cutting steels, also for grinding operations.

Politren M-169

Oil coolant. Stamping, forming, upsetting, pressing, cutting.

Politren M-174

Oil coolant. Cold drawing of calibrated rolled products. Perfect for working with all types of steel, including those subjected to phosphating.

Politren M-175

Oil for electrical discharge machining. Electrical discharge finishing and rough machining.

Politren M-175 V7

Electrical discharge finishing and roughing

Politren M-179

Synthetic oil coolant. A wide range of metalworking processes: drilling, grinding, milling, cutting, gear hobbing.

Politren M-180

Oil coolant. Production of hardware products. For cold heading machines.

Politren M-182

Oil coolant. A wide range of metalworking processes, including for working with difficult-to-machine alloys of steel, copper, cast iron. Universal coolant.

Politren M-201

Cold rolling of non-ferrous metals

Politren M-203

Universal technological cleaning fluid. Used for cleaning non-ferrous metals.

Politren M-250

Forming oil. Apply to pre-cleaned formwork surface. Forms a physical and chemical separating layer that prevents concrete from sticking and facilitates formwork removal.

Politren M-3

Technological lubrication. Semi-continuous casting of aluminum ingots into a crystallizer.

Politren M-3 A

Technological lubrication. Semi-continuous casting of aluminum ingots into a crystallizer.

Politren M-3 A20

Technological lubrication. Casting of aluminum ingots with automatic lubrication supply. Used on Wagstaff type casting machines.

Politren M-3 A5

Technological lubrication. Casting of aluminum ingots with automatic lubrication supply. Used on Wagstaff type casting machines.

Politren M-3 A51

Graphite-containing lubricant-deoxidizer. Casting of aluminum rod blank. Used as a separating coating for application to the copper crystallizer wheel.

Politren M-3 S

Synthetic process lubricant. Semi-continuous casting of aluminum ingots into a crystallizer.

Politren M-3 V

Technological lubrication. Rolling of aluminum strip.

Politren M-33

Technological lubrication. Semi-continuous casting of aluminum ingots into a crystallizer.

Politren M-35

Technological lubrication. Semi-continuous casting of aluminum ingots into a crystallizer.

Politren M-5

Oil process lubricant. Hot stamping of steels and copper alloys, including brass and bronze. Deep deformation of copper alloys.

Politren M-501

Oil process lubricant. Hot stamping and pressing of aluminum, copper alloys, including brass and bronze. Hot stamping with automatic lubrication supply.

Politren M-503

Oil process lubricant. Hot stamping and pressing of aluminum, copper alloys, including brass and bronze. Hot stamping with automatic lubrication supply.

Politren M-51

Oil process lubricant. Hot stamping of copper alloys, including brass and bronze. Hot stamping with automatic lubrication supply.

Politren M-7

Solid oil-graphite technological lubricant. Hot stamping of steels and alloys. Also used for hot pressing of copper alloys and non-ferrous metal alloys.

Politren M-9

Oil-graphite technological lubricant. Hot stamping and pressing of aluminum, copper alloys, including brass and bronze. For pressing aluminum pipes.

Politren M-91

Oil-graphite technological lubricant. Hot stamping and pressing of aluminum, copper alloys, including brass and bronze. For pressing aluminum pipes, application to the needle.

Politren MAE-1

Oil process lubricant (paint). Casting of non-ferrous metal alloys. Used as anti-erosion protection for distributing buckets.

Politren MBK

Fast evaporating oil coolant. Cold stamping and forming of all grades of steel and non-ferrous metals, where further removal of the lubricant is difficult or impossible. Oil coolant with a high evaporation rate.

Politren MBK-5

Fast-evaporating oil coolant. Grinding of all grades of steel and non-ferrous metals. It is a reinforced formula, contains anti-seize additives. Suitable for heavy operations, after which the flushing stage is difficult.

Politren MD

Cleaning liquid-paste. Industrial cleaning, anti-corrosion agent for washing metal parts, units, hard-to-clean surfaces and coolant circulation systems in the form of a paste for dilution in water. Maximum concentration of cleaning agent.

Politren MD-1

Washing liquid. Industrial washing, anti-corrosion agent for washing metal parts, units, hard-to-wash surfaces and coolant circulation systems in the form of a paste for dilution in water. Maximum concentration of washing agent.

Politren MD-2

Washing liquid. Industrial washing, anti-corrosion agent for washing metal parts, units, hard-to-wash surfaces and coolant circulation systems, enhanced bactericidal effect, helps even in serious and advanced cases of bio-damage. Supplied in the form of a paste for dilution in water. Maximum concentration of washing agent.

Politren MD-4

Washing liquid. Industrial washing, anti-corrosion agent for washing metal parts, units, hard-to-clean surfaces and coolant circulation systems, enhanced bactericidal effect, helps even in serious and advanced cases of bio-damage.

Politren MD-5

Washing liquid. Industrial washing, anti-corrosion agent for washing metal parts, units, hard-to-wash surfaces and coolant circulation systems, has enhanced rust protection, is suitable for inter-operational washing of parts, protects them from corrosion.

Politren ME-1

Hardening process lubricant. Running-in of rolling bearings.

Politren MG-2

Anti-seize lubricant - paste. Casting of aluminum alloys of the magnesium group in a crystallizer. Also used for lubricating rods and individual sections of molds where burrs and metallization are observed during the process of casting aluminum alloys under pressure.

Politren MG-4

Anti-seize lubricant - paste. Casting of aluminum alloys. Also used for lubricating rods and individual sections of molds where burrs and metallization are observed during the process of casting aluminum alloys under pressure.

Politren MG-6

Anti-seize lubricant - paste. Casting of aluminum alloys. Also used for lubricating rods and individual sections of molds where burrs and metallization are observed during the process of casting aluminum alloys under pressure.

Politren MK-1

Corrosion protection for all types of steel

Politren MN-2

Technological lubrication. Casting of aluminum ingots with automatic lubrication supply. Lubrication supply through a graphite crystallizer.

Politren MN-3

Technological lubrication. Casting of aluminum ingots with automatic lubrication supply. Lubrication supply through a graphite crystallizer.

Politren MP-1

Graphite-free oil process lubricant. Die casting of aluminum alloys. Used for application to the pressing pair.

Politren MR

Oil coolant. Cold metalworking. Universal oil coolant. High tribological characteristics. For deep stamping, drawing, deep drilling, turning and other steel and alloy processing operations. Use in ready-made form, can be used when diluted with industrial oil.

Politren MR A12

Technological lubrication. Cutting of aluminum ingots on circular and band saws of the Sermas and Wagner type.

Politren MR A18

Technological lubrication. Cutting of aluminum ingots on circular and band saws of the Sermas and Wagner type.

Politren MR A2

Oil-graphite technological lubricant. Deep drawing of difficult-to-deform steels and alloys.

Politren MR-1

Oil coolant. Warm cutting of aluminum ingots on circular and band saws.

Politren MR-45

Cold metalworking. Universal oil-based coolant. For stamping, drawing, deep drilling, turning, and other operations involving steel and non-ferrous metal alloys.

Politren MR-S

Oil coolant. Cold metalworking. Universal oil coolant. For stamping, drawing, deep drilling, turning and other steel and alloy processing operations.

Politren MR-ST-2

Oil coolant. Cold metalworking. Universal low-viscosity oil coolant for operation in oil mist mode, including for cutting operations, thread cutting of carbon low-alloy, high-alloy and stainless steels, also used for cutting aluminum ingots on circular and band saws.

Politren MR-ST-3

Oil coolant. Various metalworking operations in oil mist mode, including cutting, threading of carbon low-alloy, high-alloy and stainless steels, also used for cutting aluminum ingots on circular and band saws. Has medium viscosity.

Politren MV-150

Oil coolant. Drawing of aluminum and copper alloys. Low viscosity.

Politren MV-3000

Oil coolant. Drawing of aluminum and copper alloys. Universal composition.

Politren MV-550

Oil coolant. Drawing of aluminum and copper alloys. Medium viscosity.

Politren MV-6000

Oil coolant. Drawing of aluminum and copper alloys. High viscosity. Drawing of copper alloy pipes.

Politren MV-7000

Oil coolant. Drawing of aluminum and copper alloys. For drawing aluminum tubes, aluminum rod.

Politren MV-7002

Oil coolant. Drawing of aluminum and copper alloys. For drawing aluminum tubes, aluminum rod. No ash after annealing.

Politren MVP-3

Oil for twisting. Facilitates twisting of metal cord.

Politren PL

Dry process lubricant (granulate). Die casting of aluminum alloys. Used for application to the pressing pair.

Politren RT

Aluminum alloy die casting. Used for lubricating the container and press stamp.

Politren S

Graphite lubricant (dry concentrate, dilute with water before use). Hot rolling of steel pipes. Application on PQF and FQM type mills.

Politren S-24

Graphite lubricant (dry concentrate, dilute with water before use). Hot rolling of steel pipes. Application on PQF and FQM type mills.

Politren SK-1

Consistent lubricant. Plastic technological lubricant is used for guides of working parts of presses and rolling mills.

Politren SKN – 1

Technological lubricant. Wire calibration, cold stamping, drawing and thread cutting. The range of working concentrations depending on the complexity of the mode from 10 to 50%. Suitable for ferrous and non-ferrous metals. For drawing copper alloys, including drawing pipes and rods.

Politren SKN – 115

Synthetic process lubricant. Cold stamping, drawing, thread cutting, tube end forming, wet drawing.

Politren SKN – 2

Technological lubricant. Thread cutting, cold stamping, drawing, shaping of pipe ends. Special oil-free paste with mineral filler. Applicable to all types of steel, including titanium and stainless steel.

Politren SKN-11

Technological lubricant. Wire calibration, cold stamping, drawing and thread cutting. The range of working concentrations depending on the complexity of the mode from 10 to 50%. Suitable for ferrous and non-ferrous metals. For drawing copper alloys, including drawing pipes and rods.

Politren SKN-3

Wire calibration, cold stamping, broaching, and thread cutting. Operating concentration range depending on the complexity of the mode from 10 to 50%. Suitable for ferrous and non-ferrous metals. For drawing copper alloys, including drawing pipes and rods.

Politren SMP-2

Technological lubrication. Lubrication of the gear engagement of the outer rim of ball mills, cylindrical crushers, other open friction units, heavily loaded gear transmissions.

Politren SPF – 315

Technological lubricant. Oil-free. Deep cold drawing and stamping of difficult-to-deform steels and alloys. Excellent lubricating properties. Easily washed off with water. Effective for obtaining a clean surface of the part.

Politren SPF-1

Dry process lubricant (dry concentrate, diluted with water before use). Hot rolling of seamless pipes on floating mandrel mills.

Politren SPF-2

Dry process lubricant (dry concentrate, diluted with water before use). Hot rolling of seamless pipes on pilgrim mills.

Politren SPF-3

Technological lubricant. Oil-free. Deep cold drawing and stamping of difficult-to-deform steels and alloys. Very good lubricating properties, high viscosity. Easily washed off with water. Effective for obtaining a clean surface of the part.

Politren SV-2

Water-graphite cutting fluid. Hot stamping of steels and alloys, hot stamping/rolling of railway wheels.

Politren SV-3

Water-graphite cutting fluid. Hot stamping of steels and alloys, hot stamping/rolling of railway wheels.

Politren SV-7

Graphite lubricant (liquid concentrate, dilute with water before use). Hot rolling of steel pipes. High performance characteristics. Application on PQF and FQM type mills.

Politren TA-200

Consistent lubrication. Lubrication of various types of gearboxes, including gearmotors.

Politren TL-4

Protective technological lubricating coating. Isothermal stamping. Processing of blanks before high-temperature deformation of titanium, stainless and special alloys, in order to protect the surface of the blank from oxidation and hydrogenation during heating and transportation of the hot blank before stamping, forging, rolling.

Politren TL-41

Isothermal stamping. Treatment of blanks prior to high-temperature deformation of titanium, stainless steel, and special alloys to protect against oxidation and hydrogenation of the blank surface during heating and transportation of hot blanks prior to stamping, forging, and rolling.

Politren V-1

Water-graphite cutting fluid (used in ready-to-use form or diluted with water 1:1-1:2). Hot drawing in the process of manufacturing sharply curved bends of steel pipes, hot stamping.

Politren V-2

Water-graphite cutting fluid. Hot stamping of steels and alloys, hot stamping of non-ferrous metal alloys.

Politren V-24

Water-graphite cutting fluid. Casting of aluminum strip. Used as a separating coating.

Politren V-24K

Aluminium tape casting. Used for application to new chrome-plated tools to improve the adhesion of Politren V-24 cutting fluid.

Politren V-301

Water-graphite cutting fluid. Hot stamping of steels and alloys, hot stamping of aluminum and titanium alloys.

Politren V-31

Water-graphite cutting fluid (used in ready-to-use form or diluted with water 1:1-1:2). Hot drawing in the process of manufacturing sharply curved bends of steel pipes, hot stamping.

Politren V-40

Water-graphite coolant. Hot stamping of steels and alloys, stamping of large-sized parts, including large-diameter bottoms.

Politren V-403

Water-graphite cutting fluid. Hot stamping of steels and alloys, hot stamping/rolling of railway wheels.

Politren V-405

Hot stamping of steels and alloys, hot stamping/rolling of railway wheels

Politren V-5

Water-graphite cutting fluid (used in ready-to-use form or diluted with water 1:1-1:2). Hot drawing in the process of manufacturing sharply curved stainless steel pipe bends, hot stamping of stainless and heat-resistant steels.

Politren V-6

Water-graphite cutting fluid. Rolling in new mandrels on pipe rolling mills.

Politren VEA

Anti-corrosion liquid. Anti-corrosion protection of steels, alloys. Used for pipe pressing, hydrotesting, and also as a molding liquid for volume stamping, light cold metalworking processes.

Politren VEA-1

Synthetic anticorrosive liquid. Anticorrosive protection of steels, alloys. Used for pipe pressing, hydraulic presses for pipe pressure testing, and also as a molding liquid for volume stamping.

Politren VEA-R

Politren М

Oil technological lubricant. Hot stamping of steels and copper alloys.

Политрен VG-46

For use in hydraulic systems of metallurgical, foundry, mining, glass and other equipment.